3 In. x 18 In. Belt Sander with Pressure Control

Model #7510

With 6.0 amps of power, this belt sander sands practically any type of wood surface. The pressure control indicator illuminates when the right amount of pressure is applied for best sanding results. Plus, the belt stays centered on the 3" belt sander with our patented auto track belt alignment.

Pressure Control Technology monitors sanding pad pressure applied for optimal finish
6.0 Amps of Power sands any type of wood surface
Micro-Filtration – Captures and contains fine dust particles
Auto track belt alignment keeps belt centered

Find a Retailer

Features: 3" x 18" Belt Sander with Pressure Control

Pressure Control Technology monitors sanding pad pressure applied for optimal finish
6.0 Amps of Power sands any type of wood surface
Micro-Filtration – Captures and contains fine dust particles
Auto track belt alignment keeps belt centered
Vacuum Compatible – Fits standard 1-1/4 in. vacuum hoses
Flush Edge Sanding sands right up to the edge for maximum capacity
Single Lever Belt Changes
On/Off Trigger with Lock-on Button

Specifications: 3" x 18" Belt Sander with Pressure Control

Amperage:
Belt Size:
Certifications:
Cord Length:
Name:
RPM (loaded):
Voltage:

6.0
3" x 18"
UL, CSA
6 Ft.
7510 (F0127510AA)
1050
120V

Includes:

(1) 3 x 18 in. 80-Grit Sanding Belt
3" x 18" Belt Sander, model 7510-01
Clear-View Dust Canister

Reviews: 3" x 18" Belt Sander with Pressure Control

7510 2.5 5 2 2

Great product for the price I know the first guy didn't give this a good review, but I found this product to be very good for the price. I've probably logged over 4 hours of use on this machine and the only complaint I have is that the filter does fill up fast and will blow off, you just have to keep it emptied regularly or use the shop vac attachment. I have been using inexpensive Harbor Freight belts on it and have not had one belt issue or slip on this tool. The project I purchased this for is to strip and rebuild kitchen cabinets, so it is getting a lot of use. Good product for the money, maybe first reviewer just got a bad one. October 29, 2012

Micro filter fails in less than hour of use - can't be replaced?!!! FAIL! Sander shreds belts no matter how often you adjust the screw to keep it on track. Filter failed (round end disc came unglued from filter and got blown clear out of the plastic container along with all the rest of the dust until I gave up on this thing. Sander gets hot... really really hot within minutes. Tried using sander for 10 minutes. (Adjusted belt 4 times per 10 minutes to attempt to get it to not shred belts). Vacuumed sander body out after tapping out the worthless dust reservoir and setting it aside to cool down. Discovered motor full of dust. Set sander in front of fan for an hour to cool down so I could use it again. Repeated this slow process four times with no improvement in performance. I didn't buy expensive belts so belt failure I could accept but the belts are failing... they are getting shredded. I will be returning this to the store from whence it came and getting a different model. I do not recommend. Not well thought out. August 6, 2012

1-2 of 2

Accessories : 3" x 18" Belt Sander with Pressure Control